SKU: B0FJFQZ828
CÓDIGO DE BARRAS:
PROVEEDOR: MidronePro

C8 ELRS V3 2.4GHz 8CH RC Radio Transmitter and Nano Receiver CR8 for FPV Drones/Tiny Whoop/Fixed Wing,FPV Drone Simulator Controller for Beginner,Mode 2 (C8 ELRS Controller & 2pcs Receiver)

$71.00

Impuestos incluidos.

Envío calculado al finalizar la compra.

Personas están viendo esto actualmente

¡En stock!

Envío gratuito en pedidos superiores a 100 $

Disfrute de envío estándar gratuito al gastar 100 $ o más. Sin costes ocultos, solo más valor en cada pedido.

Devoluciones fáciles en 14 días

¿Cambió de opinión? No hay problema. Tiene 14 días para devolver su artículo, sin preguntas.

Cantidad

Estoy de acuerdo con los Términos y Condiciones.

Pago Seguro Garantizado

Descripción Descripción

Envíos y devoluciones Envíos y devoluciones

【Simulator to Real FPV,One Controller, Zero Learning Curve】Use the C8 Elrs Controller via USB-C and instantly fly 10+ FPV simulators for training — no driver, no config needed. When you're ready, switch to real ELRS flight with the same sticks, same feel, same muscle memory. A practical entry-level radio transmitter for Tiny Whoops, micro quadcopters and everyday FPV practice.
【Support FPV Simulators&Platforms 】This FPV controller has the function of FPV simulator via USB Type-C, plug-and-play operation .suitable for FPV beginners to play FPV simulators like Uncrashed, Liftoff, DCL, DRL, RealFlight Evolution, TRYP FPV, Velocidrone, FPV Logic, FeelFPV, SkyDive, FPV Battlefield, and more.With such a rich selection of software, users can easily choose the one that aligns with their preferences and specific training needs.
【155G Lightweight and Easy to Carry】Weighing about 155g, the C8 is compact and travel-friendly for home training, field practice and casual flying. The lightweight body is comfortable for younger users, smaller hands and pilots who prefer a more portable radio controller.
【8 Channel Control With Built-In Rechargeable Power】RC controller provides 8CH control with dual stick operation and auxiliary switches for common FPV flight functions. The built-in 650mAh rechargeable battery charges by Type-C and supports about 2 hours of use, with smart safety features include low-voltage alarm (red flash + beep at <15%) and automatic shutdown at 3.3V to prevent over-discharge.
【Preconfigured 2.4GHz Elrs,Fewer Settings Before Practice】Designed around 2.4GHz ExpressLRS with fixed 100mW output and ≤7ms end-to-end latency for responsive simulator and FPV control. Its preconfigured ELRS system removes power-selection menus so beginners can focus on learning instead of managing advanced radio settings.
【Beginner-Friendly ELRS V3 Setup – Simple 3-Step Binding】Compatible with 2.4GHz ExpressLRS receivers using ELRS V3.0–3.3.2 firmware. The included CR8 Nano receiver binds in seconds using the right stick and SA switch — no complex WiFi or browser configuration needed. Clear LED indicator (Blue = Connected, Red Flash = Low Battery) and audible beeps provide real-time status at a glance.Start your FPV journey today!
【CR8 ELRS NANO Receiver】The CR8 radio receiver (18.9×11.2×1mm, 0.8g PCB) Utilizes next-generation expresslrs wireless technology,featuring long-range control,stbility,ultra-low latency,High refresh rates, and flexible configuration.Compact design for flexible installation,fits easily on micro FPV Drone or Tiny Whoop.
【What You Will Get】Package includes :1 x C8 ELRS Controller(Mode 2), 2 x ELRS NANO Receiver,1 x USB Type-C Cable,1 x Manual(The operation manual contains instructions for connecting and using multiple mainstream software).

Product description

Previous page

Next page

C8 ELRS Controller with CR8 Nano ExpressLRS 2.4ghz Receiver Specification

Name:	C8 ELRS 2.4ghz Controller
Channels:	8 Channels
Throttle Hand:	Left Handed(Model 2)
Battery Specification:	3.7V, 650mAh
Transmit Power:	100mW
Operating /Charging Time：	>2 Hours / 2 Hours
Weight:	150g
Simulator Function	Supported

Name:	CR8 Nano ExpressLRS 2.4ghz Receiver
MCU:	EPS8285
Firmware Version:	ExpressLRS V3.3 pre-installed
Antenna:	55mm 2.4ghz T Antenna
Antenna Connector:	IPEX -MHF
Power Consumption:	45mA
PCBA Weight:	0.8g
Dimension:	18.9mm*11.2mm